Welcome to the DMR Site for British Car Information.
|
|
Triumph TR6 - Headlight wire size
| I think I finally chased down my problem with my lights. My high beams worked but not my low beams. I found I had no continuity going from the DIP switch to the connection at the driver side headlight bulb. I took a long wire and made the connections and then there was light! I'm going to replace the blue/red (UR) wire, so what gauge is it and where can you buy it? I'm sure it's in Dan Master's book but I must have missed it. I know I could pick up the right size but it wouldn't have the right colors; Lord knows I've done enough to be considered a DPO. Thanks, Mark |
| Mark Wright |
| Mark, Just send Dan or Mike a note and tell them what you need. Dan may tell you to run the circuit through a relay, but he can supply the correctly colored wire, albeit, likely a gage larger than stock. db |
| Doug Baker |
| Or just go to any automotive parts store..they stock wire on rolls or you can buy by the foot what you need. They'll have the gauge you need.take a sample piece with you. Try and use the original wire where it is seen and use the "NEW" wire under the wrapping. Charlie |
| Charlie B. |
This thread was discussed on 25/09/2007
Triumph TR6 index
This thread is from the archives. Join this live forum now