Welcome to the DMR Site for British Car Information.
|
|
MG TD TF 1500 - TF Clock
| I've seen references to Hal Kramer's article on repairing TF Clocks. Is the article still available on the web or elsewhere? Thanks Mike R |
| m renton |
| Mike, I got info. from a helpful contributor several years ago - should be in the Archives! Cheers, John |
| J C Mitchell |
| I've tried those links but they are no longer valid. Even tried e-mail to Hal Kramer at two different addresses without success. Mike R |
| m renton |
| Hal Kramer is a member of our club, try <hkramer@nycap.rr.com> That should get him. Cheers, Bob |
| Bob Jeffers |
| Thanks I've already sent an e-mail to that address so we'll wait and see. Cheers Mike R |
| m renton |
| Bob Jeffers, what club do you belong to? I live in MA but close the NH border near Nashua. I'm looking to join / meet fellow MG people. Frank dirtydish AT comcast DOT net |
| Frank Cronin |
| Mike Eck of http://www.jaguarclock.com/ updates Smiths clocks with an electronic mechanism. I believe he would do MG Smiths/Jaeger clocks as well. He did one for my Jaguar 3.8S sedan and it has been working fine since. I believe he is located in New Jersey. |
| John Quilter (TD8986) |
| When the balance wheel swings back & forth it contacts a small carbon brush which wears with time. This can be pushed through it's holder with care and a magnifying glass to se what you are doing & often this work will keep the clock going. |
| Garth Bagnall |
| Mike R, I went into the Archives today under 'Clocks', about halfway down the list that came up, there is a heading 'TD Clock screws needed' the one immediately underneath is called 'TD Clocks' - that is the one you need to open up. It was started by RAF Robert Finucane, and a lot of info. is given by a number of our 'members', including some queries from me! Also further down the list there is a heading 'TF instrument repair' - open it up and there is another link, still active as of today, from David Wardell of Milton Keynes in the UK, relating to '.........rhodes/speedo.p.d.f. - useful cleaning/repair info. Hope this helps, Cheers, John |
| J C Mitchell |
| Thanks John and all the other responders as well. I finally found some material on the clock. Thanks Mike R |
| m renton |
| Frank, I belong to the same club as Bob Jeffers...we are the MG T-Party...many members in MA & NH... http://www.mgtparty.org/ Bob Dougherty Editor, T-Party Times |
| Bob Dougherty |
This thread was discussed between 04/12/2011 and 08/12/2011
MG TD TF 1500 index
This thread is from the archives. Join this live forum now