British-Cars.com
MG TD TF 1500 generator rebuild BBS discussion at British-Cars.org
British-Cars.org
Welcome to the DMR Site for British Car Information.
Recommendations
Parts
MG parts spares and accessories are available for MG T Series (TA, MG TB, MG TC, MG TD, MG TF), Magnette, MGA, Twin cam, MGB, MGBGT, MGC, MGC GT, MG Midget, Sprite and other MG models from British car spares company LBCarCo.
|
|
MG TD TF 1500 - generator rebuild
| Since I refurbished the generator I thought I might as well change out the bearing. It is a sealed bearing and although it is the same thickness as the original it leaves a small amount of room between the bearing and the retaining clip. The original bearing had a metal washer on either side of the bearing with an o ring in between. Should I try and replace the washers or do you think a longer spacer would be better? Rob |
| Rob Welborne |
| Rob, What model dynamo is it and for what car? Model no. should be on the body of the casing eg C39, C45, etc. The pulley end bearing varied in it's housing on different models. Once you give more info. an answer can be suggested! Cheers, John |
| J C Mitchell |
| John, Sorry this is late but I worked out the problem. Thank yo anyway. Rob |
| Rob Welborne |
This thread was discussed between 10/09/2011 and 13/09/2011
MG TD TF 1500 index
This thread is from the archives. Join this live forum now