British-Cars.org

Welcome to the DMR Site for British Car Information.

Recommendations

Parts

MG parts spares and accessories are available for MG T Series (TA, MG TB, MG TC, MG TD, MG TF), Magnette, MGA, Twin cam, MGB, MGBGT, MGC, MGC GT, MG Midget, Sprite and other MG models from British car spares company LBCarCo.

MG TD TF 1500 - crossflow cylinderhead for an xpag engine

Hello,

During a visit in Stoneleigh in februari I bought a crossflow cylinderhead for an xpag engine.

Is there anybody out there who has any experiences with this?

I enclose a photograph

Thank you

Erik
(The Netherlands)


Erik vanHardeveld

NO!!! But I'm very interested...who manufacturers it and who sells it?
Gene Gillam

Looks real neat!!!!!!!! I'm assuming aluminum???
Besides the many plusses, it's one way to beat vapor lock!!HA

SPW
STEVE WINCZE

a quick google search says andy king sells XPAG cross flow heads for 2000 pounds. during the same search i found an XPAG with a dual overhead cam conversion...wild. see pic. regards, tom

tom peterson

The Runyan DOHC set-up is one that is being re-cast now, and should be available by early next year. I anticipate being the distributor, as I am of the Eaton-type blower kit that bolts right on a T-series car - gives as 45% HP increase at the wheels, with absolutely NO down-side.

Tom Lange
MGT Repair
Bar Harbor, ME
t lange

....sigh....pant, pant, pant....
gblawson(gordon- TD27667)

Tom can you e mail me the cost of the eaton blower and what is needed. tmaine51atyahoo.com. note this does not contain the at sign that you will need to insert. thanks tom
Tom Maine (TD8105)

Hello,

Indeed I bought it from Andy King and I have contact
with another owner in Sweden who also has some trouble to get it going.

I will see Andy in Beaulieu again (next september)
and consult him.

I am anxious though to know if any other ownerz of XPAGengined cars use it.

Thank you

Erik
Erik vanHardeveld

This thread was discussed between 26/07/2011 and 27/07/2011

MG TD TF 1500 index

This thread is from the archives. Join this live forum now