Welcome to the DMR Site for British Car Information.
|
|
MG MGF Technical - Year model 'B' transmission compatibilities
| I have read some threads about this topic but have a particular question. I have a '69 B with a transmission that is going out and it is mated to a GK engine,I suspect a very early run of that series,and the old style starter. It does have a 4 synchro transmission and the bell housing has been cut out for the Bendix assy on the starter . I have a chance to pick up a good used '80 model transmission for a good price and need to know if the pilot shaft dia. are the same on both transmissions,ostensibly they are from what I have studied. Mostly if they are interchangeable without further mods. as the vehicle exists now. I do not know why the hole was cut in the bell housing for a starter that did not come with that engine but in the intervening years someone in their wisdom did the deed. I can put up with the starter business and would cut a hole in the '80 housing easily enough if they would swap out with no other mods. necessary. I would likely replace the back plate ,flywheel, and starter however. Please someone let me know ,thanks |
| S.J. Kuhn |
| You need to post this in the MGB section my friend. |
| Sam Murray |
This thread was discussed on 14/12/2010
MG MGF Technical index
This thread is from the archives. Join this live forum now