British-Cars.org

Welcome to the DMR Site for British Car Information.

Recommendations

Parts

MG parts spares and accessories are available for MG T Series (TA, MG TB, MG TC, MG TD, MG TF), Magnette, MGA, Twin cam, MGB, MGBGT, MGC, MGC GT, MG Midget, Sprite and other MG models from British car spares company LBCarCo.

MG MGF Technical - PRT Installation

Hi,

I've given a run down on my PRT install in another thread and it should probably be in here!
have a look in MGF General under "you all talk about Head Gaskets"
cheers
Dave
D Coles

That looks a good compact installation Dave, how much of that pipework is off-the-shelf, and how much modifying new/old bits? Total parts cost?
Charless

Hi,
it's just the Freelander kit from Rimmers. About 50 quid from memory plus postage!
I think it's the only one now available but I could be wrong? I used some bits of some of the kit piping and some of the original pipework.
The pipe mods are easy. I used a stanley knife - new blade - and a steel rule to cut the pipes. The thermostat is an absolute pain. I took off the inlet manifold to get to it so get a new inlet manifold gasket too if you do this!
cheers
Dave
ps just took the MGF out for a blast. Heats up nice and quickly and then sits at just below the half way mark. Air temp is about 28°C - it's 9pm after all!
D Coles

This thread was discussed on 15/02/2009

MG MGF Technical index

This thread is from the archives. Join this live forum now