British-Cars.org

Welcome to the DMR Site for British Car Information.

Recommendations

Parts

MG parts spares and accessories are available for MG T Series (TA, MG TB, MG TC, MG TD, MG TF), Magnette, MGA, Twin cam, MGB, MGBGT, MGC, MGC GT, MG Midget, Sprite and other MG models from British car spares company LBCarCo.

MG MGF Technical - Head Gasket

Hi All

New to owning a MGF VVC and have a head gasket blow on it have read all I can before proceeding but getting a bit concerned about the cambelt as i cannot find any locking tool for the VVC has anybody any suggestions on this matter

Regards

Stuart
Stuart Atkinson

Hi,

I hope I understood what you mean.
There is no locking tool for the VVC side of the head.
The only is for the cam wheels on the cam belt side.

Original 18G1570 (red, plastic)
http://www.mgfcar.de/cam_belt/cam_lock_tool_DSC05148.jpg
or
Draper CLT-K16 Rover Group Camshaft Locking Tool
(DRA52306)
http://www.mgfcar.de/tools/1846.jpg

HTH
Dieter
Dieter

Thanks Dieter

spot on any suggestions on holding the VVC belt when i am working on the cam

Regards

Stuart
Stuart Atkinson

This thread was discussed between 04/06/2011 and 06/06/2011

MG MGF Technical index

This thread is from the archives. Join this live forum now