Welcome to the DMR Site for British Car Information.
|
|
MG MGF Technical - Four point harness
| Has anybody fitted a four-point harness into a fully-trimmed car and, if so, how please? Thanks, Neil |
| Neil22 |
| Try this, I have a half cage so the rear is attached to that. If you want to you can put two bolts through the very rear ofthe engine compartment BUT you will also need a thick reinforcing bracket on the inside ( engine compartment ) to mount the bolts to. PM me if you want more photos
|
| Andrew Regens |
This thread was discussed between 06/02/2011 and 13/02/2011
MG MGF Technical index
This thread is from the archives. Join this live forum now