Welcome to the DMR Site for British Car Information.
|
|
MG MGF Technical - Coolant level sensor malfunction?
| About four years ago I had the B&G coolant level sensor kit fitted to my F. It had worked fine although the car never lost a drop of fluid after being repaired of its HGF. All the lights and beeps work well when the contact is on, however I wanted to further check and depressed the circular floater with a stick... and no alarm went off. How could I check if the thing is really working? Thanks. Mike |
| JM Vega-P. |
| Mike, did you consider the build in delay time ? I don't own the B&G kit but assume the delay may be a few seconds. So push down the magnet and wait some time. Regards Dieter |
| Dieter |
| It should be about 11 seconds with the 4 years ago model. Give it more time! |
| Charless |
| Thank you Dieter and Charless. I did not consider -remembered- the delay. Will try again this afternoon and let you know. Best Mike |
| JM Vega-P. |
| Dieter, Charless: you were quite right. There is a delay and the alarm took about 10 seconds. I was happy to learn that the coolant level kit is still working. I thank you both very much Mike |
| JM Vega-P. |
This thread was discussed between 26/01/2011 and 30/01/2011
MG MGF Technical index
This thread is from the archives. Join this live forum now