Welcome to the DMR Site for British Car Information.
|
|
MG MGB Technical - Wiper arms/blades
| 1972 bgt. Need wiper blades for wiper arms that are 3/16" wide. Moss lists three different blades for the GT -- thru 1968, 1969-1972, and 1973 on. Since I'm not sure if my wiper arms are correct, what year would be right for arms that are 3/16" wide? Thanks, Tom |
| Tom Custer |
| There are various lengths and widths here http://www.mgpartsuk.co.uk/prods/pc175.html 3/16" = 5mm Take your pick, noting the different lengths. |
| Geoff E |
| Tom: Windshield wiper blades are a bit of a P.I.T.A. There are so many variables due to planned obsolecense. This is done to force you into buying new arms etc. I removed one of the rubber blades from the wiper and matched the profile to another blade. I purchased a set of 22" blades, removed the rubber, cut it to fit the 3 wipers I already had. There is about 5" left from the blades I bought. Cheers Gary 79 mbg |
| gary hansen |
| Tom, Have you tried going to a local auto parts store to match something up? On my way from KY to CA I stopped somewhere in NM or AZ at an Autozone for wiper blades. It took us a while, but we did find something that worked. These things go through so many changes over the years that I think you may be setting yourself up for disappointment if you try to order them by the make and model of your car. Charley |
| C R Huff |
| Thanks for the info gents and thanks Geoff for the link to the list of arms and blades -- should be able to use that as a guide. CR, I did go to a local parts store and got some blades to fit the 3/16" style arm, but they don't look right -- kind of bulky. Would rather try to find the slimmer, correct blades. Thanks again, Tom |
| Tom Custer |
This thread was discussed between 27/03/2011 and 29/03/2011
MG MGB Technical index
This thread is from the archives. Join this live forum now