Welcome to the DMR Site for British Car Information.
|
|
MG MGB Technical - Shim Washers for rocker shafts, Race only!
| I am about to order a selection of shim washers in order to acurately position the rockers on the rocker shaft. This is only necessary on race engines. Does anyone else have a requirement for this? Obviously larger the quantity, the cheaper it gets!! Colin |
| Colin Parkinson |
hi Colin- I got mine from Basil Adams stateside-$35 USA Dollores- for the Harlan 1:625 and 1:55 rollers. After valve job and new valves, I took 4 of the 35k thick shims down to 23k to correctly position the roller on the valve tip throughout it's reign of turning. Vic
|
| vem myers |
This thread was discussed between 03/12/2011 and 10/12/2011
MG MGB Technical index
This thread is from the archives. Join this live forum now