Welcome to the DMR Site for British Car Information.
|
|
MG MGB Technical - MGB torque query
| Hello, Does anyone know the torque with which the bolts that fix the gearbox housing to the engine back plate should be. These are the 7 or 8 bolts round the gearbox casing. Many thanks Alex |
| Alex Davies |
| Not critical, but I would guess about 25 ft/lbs. Just as long as they're not going to come loose. |
| Dave O'Neill 2 |
| 20 lbs for 5/16 bolts 30 lbs for 3/8 bolts. Try this site: www.mgexperience.net/article/mgb/pdf/mgb-torque-settings.pdf |
| Rick Penland |
This thread was discussed on 27/03/2011
MG MGB Technical index
This thread is from the archives. Join this live forum now