Welcome to the DMR Site for British Car Information.
|
|
MG MGB Technical - MGB rev counter
| Hello, Where does the RPM reading come from on a 1971 mgb? There appears to be a drive cable for the early models but not for my model year. Is it an electrical connection? If so where does it connect to? Many thanks, |
| Alex Davies |
| It is electric/electronic. A '71 should have the RVI tacho. The ignition feed to the coil goes via the tacho and the tacho detects the pulses created by the contact breaker points switching. |
| Dave O'Neill2 |
| Alex, to add a little to Dave's response. A white wire from the ignition switch goes to the rev counter and then on to the +ve side of the ignition coil. Depending on which rev counter is fitted, the wire could form a loop on the pickup on the back of the rev counter or it will have two bullet connectors (one in, one out!). MGmike |
| M McAndrew |
This thread was discussed on 01/01/2012
MG MGB Technical index
This thread is from the archives. Join this live forum now