Welcome to the DMR Site for British Car Information.
|
|
MG MGB Technical - Guide to single battery conversion
| Is there a guide to converting from dual 6v batteries to a larger single 12v. I know it's quite a popular thing to do given the prices on 6v batteries. Or advice from individuals who have done that. Many thanks James |
| James Eastwood |
| Use a good quality 063, I have recently done my V8 it is very simple to do. http://www.v8register.net/subpages/V8NOTE329.htm |
| a goldup |
| Varta sell a good 12v battery that is perfect size to drop in |
| rachmacb |
| American made Endurant BCM650 fits without the the for a clamp - just put a piece of 3 X 2 timber about 6" long on top of it & the battery lid holds it down. Move the earth lead to the RH side. Mine in my 66 GT & others I have fitted last more than 10 years & they are totally maintenancwe free - except to keep the terminals clean. |
| Garth Bagnall |
| I used the same Endurant battery as Garth does but I managed to get a battery clamp that fitted well [ but snug ] as I didn't want to use the wood system. No problems at all and helps slightly with evening out the weight distribution left and right. Also fitted a battery cut of in the heel board as anti theft . |
| R F Murray |
This thread was discussed between 02/05/2011 and 03/05/2011
MG MGB Technical index
This thread is from the archives. Join this live forum now