Welcome to the DMR Site for British Car Information.
|
|
MG MGB Technical - carburetter concern
| Hello, I am a little concerned, as the schematic diagram is unclear, I need to know where the bracket that connects to the jet should be mounted. Please can someone send me a photo of their HS4 carburetter for clarification. Whichever position I fix the bracket, it seems to stiffen the otherwise smooth movement of the jet. See photo Many thanks
|
| Alex Davies |
| Hi Alex That arm goes behind the jet and secures to the other side of the lower jet end. The arm actually has a cut out section to allow for this arrangement. I would oil the outer surface of the jet and then see what kind of movement you see with everything in place Good luck Jeff |
| Jeff Delk |
This thread was discussed between 05/08/2011 and 06/08/2011
MG MGB Technical index
This thread is from the archives. Join this live forum now