Welcome to the DMR Site for British Car Information.
|
|
MG MGB Technical - '74 B Low tension lead
| The wiring diagram shows a white/black wire from the coil to the low tension terminal on the dizzy. However, the B/W wires on my original harness go into the harness. There is a B/W wire coming out of that same harness that has a solid black sleeve covering it. It that what plugs onto the dizzy? Thanks. |
| Dan Hiltz |
| Never mind. I used the ohmmeter and common sense and figured it out. Why didn't I do that at first? |
| Dan Hiltz |
This thread was discussed between 04/05/2010 and 05/05/2010
MG MGB Technical index
This thread is from the archives. Join this live forum now