Welcome to the DMR Site for British Car Information.
|
|
MG MGB GT V8 Factory Originals Technical - LT77 speedo drive
| Hi Does anyone know what colour speedo drive wheel is required for the LT77 gearbox fitted to a rover 3500 V8? Thanks Graham |
| GLG Lavis |
| Graham, It depends on the tyre size, final drive ratio and the turns per mile that your speedo requires. Geoff |
| Geoff King |
| Try - http://www.gower-oaks.co.uk/ - callibration. Looks complicated, I think I can sort out my own tacho but I might just give my speedo to these chaps to sort out! |
| Liam |
| When I finished my car, I took a drive with friend in his car to compare speedos. Surprisingly, the needle (original '74 speedo, 1280 tpm) was quite accurate up to about 45 mph and then slowed a bit as we got nearer 65. Wrote these numbers down and gave them to my instrument guy to re-calibrate. He mentioned he could get the needle correct or the odometer but not both. I can live with an odometer out by .1 in 10 miles. Since I had the LT77, 3.07:1 gears and 205/60-15 tires installed, I thought the speed would be way off. |
| Simon Austin |
This thread was discussed between 05/03/2006 and 06/03/2006
MG MGB GT V8 Factory Originals Technical index
This thread is from the archives. Join this live forum now