Welcome to the DMR Site for British Car Information.
|
|
MG MGB GT V8 Factory Originals Technical - Jetting an Edelbrook 1404
| I am looking for a set up where petrol consumption is more important then the max. power. Can anyone advise me what main jet, metering rod and secondary jet I should start with? The engine is a standard SD1 engine (compression 9.35) with Offenhauser manifold and a Mallory distributer. Regards Frank |
| Frank Neumann |
| Frank, For a 3.5 you need for the primaries, Jets 1421 & Rods 1441 and leave the secondaries as stock. You can get them from RPI in Norfolk http://www.rpiv8.com/homepage.htm Kevin |
| Kevin Jackson |
| Hi Kevin, thanks very much for your answer. I have contacted RPI and they respond very quickly on my e-mail. |
| FN Neumann |
This thread was discussed between 23/04/2008 and 28/04/2008
MG MGB GT V8 Factory Originals Technical index
This thread is from the archives. Join this live forum now