British-Cars.org

Welcome to the DMR Site for British Car Information.

Recommendations

Parts

MG parts spares and accessories are available for MG T Series (TA, MG TB, MG TC, MG TD, MG TF), Magnette, MGA, Twin cam, MGB, MGBGT, MGC, MGC GT, MG Midget, Sprite and other MG models from British car spares company LBCarCo.

MG MGB GT V8 Factory Originals Technical - Half shaft advice

Have anyone had dealings with Moser? I want some custom axles made and wondered what the products and service were like.
Thanks Dave.
dk lowe

I went to Moser's facility in Indiana last summer and had them narrow an 8.8 and make up custom axles. Their service was excellent and they really seem to know their stuff. I'm assuming that the products are fine, but I haven't gotten my project on the road yet.
Ryan Reis

I've used Andy for some Strange shafts, does custom work

http://www.robinson-race-cars.co.uk/

Paul
Paul

I've used Currie...great work, they built to my specifications a Ford/Currie 9 inch with 31 spline axels and 3.0:1 with rear disk brakes and emergency drums about $2,100.00 if I remember correctly. All I had to do was weld on the spring perches. They probable still have my measurements for a 78 MGB.


http://www.currieenterprises.com/







http://www.currieenterprises.com/
Michael S. Domanowski

This thread was discussed between 01/11/2005 and 02/11/2005

MG MGB GT V8 Factory Originals Technical index

This thread is from the archives. Join this live forum now