British-Cars.org

Welcome to the DMR Site for British Car Information.

Recommendations

Parts

MG parts spares and accessories are available for MG T Series (TA, MG TB, MG TC, MG TD, MG TF), Magnette, MGA, Twin cam, MGB, MGBGT, MGC, MGC GT, MG Midget, Sprite and other MG models from British car spares company LBCarCo.

MG MGB GT V8 Factory Originals Technical - GM 60deg V6 question.

Do I remember reading somewhere that there's power to be gained by installing either the heads and/or intake manifold from a 3.1 or 2.8 onto a 3.4?
Derek Nicholson

Derek, there's a lot of information on this series engine on Bill Guzman's web site http://www.classicconversionseng.com/
and in the book "Chevy Power" which is available from your local Chevy dealer. I found it online once, but can't remember the link. I've never heard of anything to be gained from fitting the older heads to the larger block, usually it's the opposite, fit later heads to early 2.8 engines with the smaller valves.
Bill Young

This thread was discussed on 26/03/2007

MG MGB GT V8 Factory Originals Technical index

This thread is from the archives. Join this live forum now