British-Cars.org

Welcome to the DMR Site for British Car Information.

Recommendations

Parts

MG parts spares and accessories are available for MG T Series (TA, MG TB, MG TC, MG TD, MG TF), Magnette, MGA, Twin cam, MGB, MGBGT, MGC, MGC GT, MG Midget, Sprite and other MG models from British car spares company LBCarCo.

MG MGB GT V8 Factory Originals Technical - Choke Cable Routing

Edelbrock carb on a Rover 3.5 L engine fitted to a 1978 MGB GT, any ideas for the routing of the choke cable, old S.U. cable went through the holes on the L.H.side of the bulkhead, no holes exist on the R.H. side except for the water and oil gauge pipes(have fitted a manual combined gauge)and routing the choke cable through one of these holes would give it two sharp bends which would surely prove problematic.

Do I have to drill a new hole in the b/head on the R.H. side? any advice accepted.

Rgds Trevor

t burnett

Mine was routed through one of the hole shared with the temp gauge pipe. Absolutely nothing problematic, works perfectly.
Allan Reeling

This thread was discussed on 08/06/2011

MG MGB GT V8 Factory Originals Technical index

This thread is from the archives. Join this live forum now