British-Cars.org

Welcome to the DMR Site for British Car Information.

Recommendations

Parts

MG parts spares and accessories are available for MG T Series (TA, MG TB, MG TC, MG TD, MG TF), Magnette, MGA, Twin cam, MGB, MGBGT, MGC, MGC GT, MG Midget, Sprite and other MG models from British car spares company LBCarCo.

MG MGB GT V8 Factory Originals Technical - Carb/Manifold for 302 on eBay.

http://cgi.ebay.com/ebaymotors/Eiledbrock-Pro-manifold-and-500cfm-Carb_W0QQitemZ260076592222QQihZ016QQcategoryZ38634QQrdZ1QQcmdZViewItem

I'm no expert, so I don't know if this setup will fit under a 'B hood.

Derek Nicholson

Derek,
This intake appears to be a "Performer 289" model #2121. If it is, then there is no problem fitting this carb & intake under the B hood. This is the same combination I have in my conversion (other than my carb is the 600cfm version).
http://www.britishv8.org/MG/GrahamCreswick.htm
Graham Creswick

Hi Derek,

As Graham already stated above. It will fit as long as you can get your engine low enough in the engine bay. Watch out for harmonic balancer/dampner to steering rack clearance though.

Interesting spelling and description on that ebay item....

Cheers

Pete
www.mantellmotorsport.com
Pete

Not looking for myself. Just thought someone else might be in the market.


Derek Nicholson

This thread was discussed on 16/01/2007

MG MGB GT V8 Factory Originals Technical index

This thread is from the archives. Join this live forum now