Welcome to the DMR Site for British Car Information.
|
|
MG MGB GT V8 Factory Originals Technical - 3.5 and 3.9 60V6 conversions
| Here is some good news for you 60V6 power freaks. I have just just been informed that a 7X reluctor ring for the newest 60V6 engines is a works in progress. What makes this good news is that our relatively inexpensive engine management system should handle the converted 3.5 and 3.9 engines. The inexpensive Megasquirt PCM can be a choice for those who like to build circuit boards. Of course there are the Electromotive, Accel, or Haltech units that cost $1600.00 and up. We already have a 65 mm throttle body that is cable operated instead of electronically controlled. There is a 70 mm throttle body in the works for the power builders.There is a fuel regulator available to utilize the single line system that GM now uses. Our hugger headers will fit and we have prototype engine mounts made for these engines. The tuneable HP in these engines are through the roof! More benefits await. We have no particular date in mind to when these products might be available. Stay tuned. Dann British Car Conversions |
| Dann Wade |
This thread was discussed on 05/06/2006
MG MGB GT V8 Factory Originals Technical index
This thread is from the archives. Join this live forum now