British-Cars.org

Welcome to the DMR Site for British Car Information.

Recommendations

Parts

MG parts spares and accessories are available for MG T Series (TA, MG TB, MG TC, MG TD, MG TF), Magnette, MGA, Twin cam, MGB, MGBGT, MGC, MGC GT, MG Midget, Sprite and other MG models from British car spares company LBCarCo.

MG MGA - Turn signal lamp holder

Can someone tell me the correct size for the dash hole for the turn signal lamp? How does the lamp holder affix to the dash? Finally does the current Moss offering 142-400 include all of the parts needed?

Thanks, John


jbackman

Original lamp jewel had a 9mm thread, so the hole in the dash panel is a 9-mm double-D hole. The Moss replacement lamp assembly has 8-mm thread, so it will fit loose in the dash hole, needing some attention to centering my hand. The Moss lamp kit is complete but does not include the chrome trim ring (that washer is available separately). For complete details see here: http://mgaguru.com/mgtech/faulty/ft012.htm
Barney Gaylord

It looks like you need to weld up the hole and repair the crack in the dash. Clean up the hole and weld a 8mm washer in it. Using a washer would make a clean looking repair. I assume the dash is coming out to be repaired and repainted?
R J Brown

Barney, thanks for the info.

RJ, I am beginning to think it will be easier and more cost effective to pick up a used dash. In addition to the bodged turn signal hole, I have a couple of other misplaced holes and other dents and dings.

John
jbackman

Any good body shop should be able to fill in the odd hole or two. Perhaps a local friend would do it for a six-pack. It is just basic bodywork.
Chuck Schaefer

This thread was discussed between 06/10/2011 and 07/10/2011

MG MGA index

This thread is from the archives. Join this live forum now