Welcome to the DMR Site for British Car Information.
|
|
MG ZR ZS ZT Technical - ZS180 2.5V6 engine noise
| Friend's ZS V6 engine has started making nasty noise tapping/knock sound. Has been running perfect up til now so asked him if anything been done recently and he said oil/filter change last week by garage but other than that, nothing. Any ideas? |
| ZedRboy |
| How many miles, 45K - 50k on the clock? |
| Kelvin |
| Check the oil level ! If you leave a K series standing for a while the tappets can drain and this leads to a tappety sound It justy needs a good run to bring them back again. Take it back to the garage and ask, in case it is something else! |
| Neil |
| My ZS which is run daily, started to get the 'tapperty' sound, and was diagnosed at first as a tappet problem, but the noise got worse and it was infact a failure in the mainifold! |
| Kelvin |
| Check my thread called "ZT-inlet manifold rattle" and other the references. It's now in the archive. Malcolm |
| Malcolm Robertson |
This thread was discussed between 19/10/2006 and 20/10/2006
MG ZR ZS ZT Technical index
This thread is from the archives. Join this live forum now