Welcome to the DMR Site for British Car Information.
|
|
MG ZR ZS ZT Technical - headlights
| how do I change the dipped beam bulbs on my zt 160 1.8 turbo? Does anyone have any experience of using xenon bulbs are thay really better? tia |
| william |
| Instructions are in the handbook, but if the 1.8T is the same as the 160 V6, then it is not too difficult. In the front wheel arches, there is an access panel to allow you to get your hand in to get to the dipped units. Remove the rubber glove, and release the wire clamp, and take out old bulb. The bulb (H7) can then be fitted and as Haynes manuals says refitting is teh reverse. Your hands will get dirty, and on the n/s the access is difficult because, if like the v6, there is the air intake hose sticking up into the area. |
| Martin ZT |
This thread was discussed between 10/11/2005 and 13/11/2005
MG ZR ZS ZT Technical index
This thread is from the archives. Join this live forum now