Welcome to the DMR Site for British Car Information.
|
|
MG MG Y Type - Twin Carbs Return Springs
| Does anyone know what tension should be applied to the carburettor shaft return springs on YT's ?. I've searched all the manuals and the website, but can't seem to find a suggested setting. I had mine set with 180 degress of tension, but it often does not return to idle after an extended high RPM run, but sits at 1200 RPM until I "blip" the throttle. I have found some wear in the shafts & body, so they will be re-bushed next week, but what is the tension needed when it all goes back together ?. cheers Tony |
| A L SLATTERY |
This thread was discussed on 01/10/2011
MG MG Y Type index
This thread is from the archives. Join this live forum now