Welcome to the DMR Site for British Car Information.
|
|
MG Midget and Sprite Technical - Head Gasket
| Hi As I have got my engine out I thought I might as well change the head gasket as there was a rust mark out of the gasket edge when I inspected it.Am I right in thinking that a payen BK450 will fit and that I should not use any gasket sealant with it,Thanks for all the advice about getting the engine out.In the end I just took the engine out and left the gearbox in Thanks as ever Mark |
| M Teal |
| "Am I right in thinking that a payen BK450 will fit and that I should not use any gasket sealant with it" Yup, spot on. |
| Lawrence Slater |
| Lawrence Thanks :-) Mark |
| M Teal |
| <<Am I right in thinking that a payen BK450 will fit >> That would depend on which engine you have. |
| Dave O'Neill2 |
| I'm in Humberside so give me a shout if you want a hand or advice. |
| J White |
This thread was discussed between 04/12/2011 and 05/12/2011
MG Midget and Sprite Technical index
This thread is from the archives. Join this live forum now