Welcome to the DMR Site for British Car Information.
|
|
MG Midget and Sprite Technical - Front hub oil seals
| Hi all. I've bought some new oil seals for the front hubs. I just want to check that the replacement seals are the same for all ages? The seal is quite different, but I can't see why it won't work as the inner bearing will just sit up against the shoulder on the stub axle anyway. Dave
|
| DH2 |
Photo of outer side of seals.
|
| DH2 |
| Hi Dave, they look like the ones that I've fitted previously when renewing front bearings. Mark |
| Mark Whitmore |
| So, I fitted the oil seal to one side at the weekend, but end result (note, I've had all the bearings out, cleaned them, and re-assembled them) is that the brake disc is now sitting less centrally in the caliper than it was before. All I can think is that the inner bearing isn't home quite fully? Though I was pretty sure it was. Dave
|
| DH2 |
This thread was discussed between 18/08/2011 and 22/08/2011
MG Midget and Sprite Technical index
This thread is from the archives. Join this live forum now