Welcome to the DMR Site for British Car Information.
|
|
MG Midget and Sprite General - Wire stone guards for brake hoses
| Does anyone know of a source of supply for wire spiral stone guards for the front brake hoses of my Midget ? There are signs of my tyres rubbing against the brake hoses. We used to use these on our rally cars in the 60's |
| John M Platt |
| bit of fuel pipe or similar split and popped over the brake pipe also works. Though they probably shouldn't catch under normal circumstances.. |
| Rob Armstrong |
| I got mine from a scrap yard a few years ago. They were on a Peugeot 205 so maybe they were standard fitment on 205s? |
| Guy |
| I carry them in stock John. If you can't get any in the UK, let me know and I'll post some over to you. Mark. |
| M T Boldry |
| John, Alter the angle the hoses are clamped at, as they enter the calipers. You might have to file the slot in the metal guard a bit wider. The other thing you can do, is put a very slight twist in the hose as it comes out of the joint at the chassis. I had this issue. On full lock I rubbed the hoses. I cured it as above. |
| Lawrence Slater |
This thread was discussed on 23/01/2012
MG Midget and Sprite General index
This thread is from the archives. Join this live forum now